求大神帮我看看这个程序错哪儿了

云舒susie

[ 本帖最后由 云舒susie 于 2014-5-13 22:34 编辑 ]\n\n[ 本帖最后由 云舒susie 于 2014-5-13 22:33 编辑 ]\n\n[ 本帖最后由 云舒susie 于 2014-5-13 22:32 编辑 ]\n\nmodel:
!集部分;
sets:
ports/1..26/:dt;!中转量;
routes/1..7/:p1,Q,m,ge,De,cfix,vmin,vmax;  !航线包含港口数,容量，船数,燃油消耗率，排水量，最小速度、最大速度;
link(routes,ports):x;   !01矩阵   该航线通过该港口为1，不通过为0;
index/1..12/;
link1(routes,index):len,v; !距离，船速;
link2(ports,routes,index):z1,z2,f,y; !装货量、卸货量、流量、01变量;
link3(ports,ports):dem,e,l,t,deme; !demand,时间窗;
endsets

data:
t1,cp1,cp2,cp3=0.01,200,150,150;  !操作时间，转运、装货、卸货成本;
beta=50;
x=
1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,1,1,0,0,0,0,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,
0,1,1,1,0,0,0,0,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,0,0,
0,0,0,0,0,0,1,0,1,1,1,0,0,0,0,1,0,1,0,1,1,1,0,0,0,0,
0,0,1,0,0,0,0,0,1,1,1,0,0,0,0,1,0,1,0,0,0,1,1,1,1,0,
0,0,0,0,0,0,1,0,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1;

p1,Q,cfix=
6,8000,133100,
7,4000,78500,
8,4000,78500,
10,4000,78500,
10,4000,78500,
13,5000,105400,
5,5000, 105400;
vmin,vmax=
17,26,
12,24,
12,24,
12,24,
12,24,
15,25,
15,25;

len=
168,280,39,6362,5777,4770,0,0,0,0,0,0,
91,268,109,502,5252,5777,5370,0,0,0,0,0,
63,39,796,110,502,4611,336,5826,0,0,0,0,
554,282,39,7668,3561,288,455,393,2805,6987,0,0,
109,321,415,669,8808,1188,1307,699,1877,10132,0,0,
569,699,1307,1548,9260,29,737,110,451,8100,1560,1142,
469,321,110,10171,627,10089,0,0,0,0,0,0;
dem=0,0,0,0,25,50,0,0,0,0,0,0,22,30,0,80,55,40,30,0,15,0,0,0,0,0,
    0,0,0,0,45,30,0,0,0,0,0,0,15,25,10,65,20,35,25,0,0,15,0,0,0,0,
    0,0,0,0,60,32,0,0,0,0,0,0,48,28,23,135,38,30,20,0,33,26,0,0,0,26,
    0,0,0,0,46,60,0,0,0,0,0,0,10,64,0,55,0,18,68,0,68,28,35,18,0,42,
    34,68,48,26,0,0,30,40,60,15,26,0,0,0,0,0,0,0,0,26,0,0,0,0,0,0,
    38,22,56,12,0,0,58,35,75,36,58,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,
    0,0,0,0,86,108,0,0,0,0,0,0,156,162,35,84,62,30,68,0,0,62,58,57,0,66,
    0,0,0,0,42,25,0,0,0,0,0,0,86,68,42,168,26,38,45,0,66,28,0,21,0,30,
    0,0,0,0,148,86,0,0,0,0,0,0,48,35,68,132,86,75,48,0,38,48,32,42,0,20,
    0,0,0,0,50,35,0,0,0,0,0,0,78,88,0,118,46,48,14,0,28,24,52,12,0,12,
    0,0,0,0,56,55,0,0,0,0,0,0,45,68,0,28,0,67,0,0,32,36,26,26,0,6,
    0,0,0,0,68,48,0,0,0,0,0,0,76,88,16,86,75,25,62,0,16,36,0,38,0,22,
    0,0,30,15,0,0,0,18,16,35,0,56,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    0,0,28,16,0,0,26,0,27,0,12,36,0,0,0,0,0,0,0,10,0,0,0,0,0,0,
    0,35,36,12,0,0,0,0,66,0,0,0,0,0,0,0,0,0,0,14,0,0,0,0,0,0,
    0,66,35,38,0,0,68,0,52,26,24,0,0,0,0,0,0,0,0,16,0,0,0,0,54,0,
    0,28,30,12,0,0,15,25,86,26,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    0,22,12,8,0,0,25,14,68,35,23,0,0,0,0,0,0,0,0,16,0,0,0,0,18,0,
    0,15,36,25,0,0,26,0,69,0,28,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,
    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,85,25,75,0,0,46,26,0,0,0,0,
    0,0,0,32,0,0,0,0,0,25,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    20,0,25,0,0,0,18,0,62,36,36,0,0,0,0,0,0,0,0,0,0,0,0,0,27,0,
    0,0,36,0,0,0,14,0,45,38,68,0,0,0,0,0,0,0,0,26,0,0,0,0,61,0,
    0,0,8,25,0,0,46,0,66,35,52,0,0,0,0,0,0,0,0,0,0,0,0,0,38,0,
    0,0,0,0,98,76,0,0,0,0,0,0,15,58,0,86,46,76,0,0,0,52,28,0,0,0,
    0,0,10,0,0,0,0,0,36,0,30,0,0,0,0,0,0,0,0,0,0,0,0,0,16,0;

o1=600;
o2=1000;
dert1=3.1;
dert2=3.3;
n=0.1;
c=280;
lama=0;
gama=0;
sita=10;

enddata

init:
z1,z2,f,y=0,0,0,0;
endinit

@for(ports(p):dt(p)=0.5*(@sum(link2(o,r,i):x(r,p)*(z1(o,r,i)+z2(o,r,i)))-@sum(ports(o):deme(o,p))-@sum(ports(d):deme(p,d))));
H=@sum(ports(p):cp1*dt(p))+@sum(link3(o,d):(cp2+cp3)*deme(o,d));
Fuel1=0.7355*o1*@sum(link1(r,i):ge(r)*len(r,i)*De(r)^2/3*v(r,i)^2*10^(-6)/c);
Fuel2=n*o2*t1*@sum(link2(o,r,i):z1(o,r,i)+z2(o,r,i));
Fix=@sum(routes(r):cfix(r)*m(r));
@for(link3(o,d):t(o,d)=@sum(link1(r,i):x(r,d)*(len(r,i)*y(o,r,i)/v(r,i)+t1*(z1(o,r,i)+z2(o,r,i)))));
chengfa=@sum(link3(o,d):lama*(e(o,d)-t(o,d))+gama*(t(o,d)-l(o,d)));
Emission=sita*dert1*0.7355*@sum(link1(r,i):ge(r)*len(r,i)*De(r)^2/3*v(r,i)^2*10^(-6)/c)+sita*dert2*t1*@sum(link2(o,r,i):z1(o,r,i)+z2(o,r,i));

!目标函数;
min=H+Fuel1+Fuel2+Fix+chengfa+Emission;

!约束条件;
@for(link2(o,r,i)|  i # gt # 1 #and#  i #lt# p1(r):f(o,r,i-1)+z1(o,r,i)=f(o,r,i)+z2(o,r,i));
@for(link2(o,r,i)|  i # eq # p1(r) :
    @for(index(j)| j #eq# 1:f(o,r,i)+z1(o,r,j)=f(o,r,j)+z2(o,r,j)));
@for(ports(p):
    @sum(link2(o,r,i)|i #lt# p1(r):x(r,p)*(z1(o,r,i)+z2(o,r,i)))>=beta);
@for(link3(o,d):
    @sum(routes(r):
        @sum(index(i)|i #lt# p1(r):x(r,d)*(z2(o,r,i)-z1(o,r,i))))=deme(o,d));
@sum(link3(o,d):deme(o,d)-0.8*dem(o,d))>=0;
@for(routes(r):
    @sum(ports(o):
        @sum(index(i)|i #lt# p1(r):len(r,i)*y(o,r,i)/v(r,i)+t1*(z1(o,r,i)+z2(o,r,i))))<=168*m(r));
@for(routes(r):
    @for(index(i)|i #lt# p1(r):
        @sum(ports(o):f(o,r,i)))-Q(r))<=0;
@for(link3(o,d):deme(o,d)<=dem(o,d));
@for(link3(o,d):deme(o,d)>=0);
@for(link1(r,i):v(r,i)<=vmax(r));
@for(link1(r,i):v(r,i)>=vmin(r));
@for(routes:@gin(m));
@for(link2:@bin(y));
@for(link2:@gin(z1));
@for(link2:@gin(z2));
@for(link2:@gin(f));
end
我在lingo11中运行之后出现这个提示，帮我看看是怎么回事啊

云舒susie

额。。怎么会有表情？？
什么情况

madio

1. model:
   
2. !集部分;
   
3. sets:
   
4. ports/1..26/:dt;!中转量;
   
5. routes/1..7/:p1,Q,m,ge,De,cfix,vmin,vmax;  !航线包含港口数,容量，船数,燃油消耗率，排水量，最小速度、最大速度;
   
6. link(routes,ports):x;   !01矩阵   该航线通过该港口为1，不通过为0;
   
7. index/1..12/;
   
8. link1(routes,index):len,v; !距离，船速;
   
9. link2(ports,routes,index):z1,z2,f,y; !装货量、卸货量、流量、01变量;
   
10. link3(ports,ports):dem,e,l,t,deme; !demand,时间窗;
    
11. endsets
    
12. 
    
13. data:
    
14. t1,cp1,cp2,cp3=0.01,200,150,150;  !操作时间，转运、装货、卸货成本;
    
15. beta=50;
    
16. x=
    
17. 1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    
18. 0,0,0,0,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    
19. 0,0,1,1,0,0,0,0,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,
    
20. 0,1,1,1,0,0,0,0,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,0,0,
    
21. 0,0,0,0,0,0,1,0,1,1,1,0,0,0,0,1,0,1,0,1,1,1,0,0,0,0,
    
22. 0,0,1,0,0,0,0,0,1,1,1,0,0,0,0,1,0,1,0,0,0,1,1,1,1,0,
    
23. 0,0,0,0,0,0,1,0,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1;
    
24. 
    
25. p1,Q,cfix=
    
26. 6,8000,133100,
    
27. 7,4000,78500,
    
28. 8,4000,78500,
    
29. 10,4000,78500,
    
30. 10,4000,78500,
    
31. 13,5000,105400,
    
32. 5,5000, 105400;
    
33. vmin,vmax=
    
34. 17,26,
    
35. 12,24,
    
36. 12,24,
    
37. 12,24,
    
38. 12,24,
    
39. 15,25,
    
40. 15,25;
    
41. 
    
42. len=
    
43. 168,280,39,6362,5777,4770,0,0,0,0,0,0,
    
44. 91,268,109,502,5252,5777,5370,0,0,0,0,0,
    
45. 63,39,796,110,502,4611,336,5826,0,0,0,0,
    
46. 554,282,39,7668,3561,288,455,393,2805,6987,0,0,
    
47. 109,321,415,669,8808,1188,1307,699,1877,10132,0,0,
    
48. 569,699,1307,1548,9260,29,737,110,451,8100,1560,1142,
    
49. 469,321,110,10171,627,10089,0,0,0,0,0,0;
    
50. dem=0,0,0,0,25,50,0,0,0,0,0,0,22,30,0,80,55,40,30,0,15,0,0,0,0,0,
    
51.     0,0,0,0,45,30,0,0,0,0,0,0,15,25,10,65,20,35,25,0,0,15,0,0,0,0,
    
52.     0,0,0,0,60,32,0,0,0,0,0,0,48,28,23,135,38,30,20,0,33,26,0,0,0,26,
    
53.     0,0,0,0,46,60,0,0,0,0,0,0,10,64,0,55,0,18,68,0,68,28,35,18,0,42,
    
54.     34,68,48,26,0,0,30,40,60,15,26,0,0,0,0,0,0,0,0,26,0,0,0,0,0,0,
    
55.     38,22,56,12,0,0,58,35,75,36,58,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,
    
56.     0,0,0,0,86,108,0,0,0,0,0,0,156,162,35,84,62,30,68,0,0,62,58,57,0,66,
    
57.     0,0,0,0,42,25,0,0,0,0,0,0,86,68,42,168,26,38,45,0,66,28,0,21,0,30,
    
58.     0,0,0,0,148,86,0,0,0,0,0,0,48,35,68,132,86,75,48,0,38,48,32,42,0,20,
    
59.     0,0,0,0,50,35,0,0,0,0,0,0,78,88,0,118,46,48,14,0,28,24,52,12,0,12,
    
60.     0,0,0,0,56,55,0,0,0,0,0,0,45,68,0,28,0,67,0,0,32,36,26,26,0,6,
    
61.     0,0,0,0,68,48,0,0,0,0,0,0,76,88,16,86,75,25,62,0,16,36,0,38,0,22,
    
62.     0,0,30,15,0,0,0,18,16,35,0,56,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    
63.     0,0,28,16,0,0,26,0,27,0,12,36,0,0,0,0,0,0,0,10,0,0,0,0,0,0,
    
64.     0,35,36,12,0,0,0,0,66,0,0,0,0,0,0,0,0,0,0,14,0,0,0,0,0,0,
    
65.     0,66,35,38,0,0,68,0,52,26,24,0,0,0,0,0,0,0,0,16,0,0,0,0,54,0,
    
66.     0,28,30,12,0,0,15,25,86,26,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    
67.     0,22,12,8,0,0,25,14,68,35,23,0,0,0,0,0,0,0,0,16,0,0,0,0,18,0,
    
68.     0,15,36,25,0,0,26,0,69,0,28,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,
    
69.     0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,85,25,75,0,0,46,26,0,0,0,0,
    
70.     0,0,0,32,0,0,0,0,0,25,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    
71.     20,0,25,0,0,0,18,0,62,36,36,0,0,0,0,0,0,0,0,0,0,0,0,0,27,0,
    
72.     0,0,36,0,0,0,14,0,45,38,68,0,0,0,0,0,0,0,0,26,0,0,0,0,61,0,
    
73.     0,0,8,25,0,0,46,0,66,35,52,0,0,0,0,0,0,0,0,0,0,0,0,0,38,0,
    
74.     0,0,0,0,98,76,0,0,0,0,0,0,15,58,0,86,46,76,0,0,0,52,28,0,0,0,
    
75.     0,0,10,0,0,0,0,0,36,0,30,0,0,0,0,0,0,0,0,0,0,0,0,0,16,0;
    
76. 
    
77. o1=600;
    
78. o2=1000;
    
79. dert1=3.1;
    
80. dert2=3.3;
    
81. n=0.1;
    
82. c=280;
    
83. lama=0;
    
84. gama=0;
    
85. sita=10;
    
86. 
    
87. enddata
    
88. 
    
89. init:
    
90. z1,z2,f,y=0,0,0,0;
    
91. endinit
    
92. 
    
93. @for(ports(p):dt(p)=0.5*(@sum(link2(o,r,i):x(r,p)*(z1(o,r,i)+z2(o,r,i)))-@sum(ports(o):deme(o,p))-@sum(ports(d):deme(p,d))));
    
94. H=@sum(ports(p):cp1*dt(p))+@sum(link3(o,d):(cp2+cp3)*deme(o,d));
    
95. Fuel1=0.7355*o1*@sum(link1(r,i):ge(r)*len(r,i)*De(r)^2/3*v(r,i)^2*10^(-6)/c);
    
96. Fuel2=n*o2*t1*@sum(link2(o,r,i):z1(o,r,i)+z2(o,r,i));
    
97. Fix=@sum(routes(r):cfix(r)*m(r));
    
98. @for(link3(o,d):t(o,d)=@sum(link1(r,i):x(r,d)*(len(r,i)*y(o,r,i)/v(r,i)+t1*(z1(o,r,i)+z2(o,r,i)))));
    
99. chengfa=@sum(link3(o,d):lama*(e(o,d)-t(o,d))+gama*(t(o,d)-l(o,d)));
    
100. Emission=sita*dert1*0.7355*@sum(link1(r,i):ge(r)*len(r,i)*De(r)^2/3*v(r,i)^2*10^(-6)/c)+sita*dert2*t1*@sum(link2(o,r,i):z1(o,r,i)+z2(o,r,i));
     
101. 
     
102. !目标函数;
     
103. min=H+Fuel1+Fuel2+Fix+chengfa+Emission;
     
104. 
     
105. !约束条件;
     
106. @for(link2(o,r,i)|  i # gt # 1 #and#  i #lt# p1(r):f(o,r,i-1)+z1(o,r,i)=f(o,r,i)+z2(o,r,i));
     
107. @for(link2(o,r,i)|  i # eq # p1(r) :
     
108.     @for(index(j)| j #eq# 1:f(o,r,i)+z1(o,r,j)=f(o,r,j)+z2(o,r,j)));
     
109. @for(ports(p):
     
110.     @sum(link2(o,r,i)|i #lt# p1(r):x(r,p)*(z1(o,r,i)+z2(o,r,i)))>=beta);
     
111. @for(link3(o,d):
     
112.     @sum(routes(r):
     
113.         @sum(index(i)|i #lt# p1(r):x(r,d)*(z2(o,r,i)-z1(o,r,i))))=deme(o,d));
     
114. @sum(link3(o,d):deme(o,d)-0.8*dem(o,d))>=0;
     
115. @for(routes(r):
     
116.     @sum(ports(o):
     
117.         @sum(index(i)|i #lt# p1(r):len(r,i)*y(o,r,i)/v(r,i)+t1*(z1(o,r,i)+z2(o,r,i))))<=168*m(r));
     
118. @for(routes(r):
     
119.     @for(index(i)|i #lt# p1(r):
     
120.         @sum(ports(o):f(o,r,i))-Q(r)<=0));
     
121. @for(link3(o,d):deme(o,d)<=dem(o,d));
     
122. @for(link3(o,d):deme(o,d)>=0);
     
123. @for(link1(r,i):v(r,i)<=vmax(r));
     
124. @for(link1(r,i):v(r,i)>=vmin(r));
     
125. @for(routes:@gin(m));
     
126. @for(link2:@bin(y));
     
127. @for(link2:@gin(z1));
     
128. @for(link2:@gin(z2));
     
129. @for(link2:@gin(f));
     
130. end

复制代码

我可以修改的不出错了，但是上面的代码运行后显示没有可行解，你最好把具体的模型发上来，这样就知道是不是代码写的有问题了